如果您對該產品感興趣的話,可以
產品名稱:
WHATMAN POLYCAP AS囊式濾器
產品型號:
6705-3602 6705-3604 6705-3610 6708-3602 6708-3604
產品展商:
其它品牌
簡單介紹
WHATMAN POLYCAP AS囊式濾器6705-3602 6705-3604 6705-3610 6708-3602 6708-3604 6709-3602
WHATMAN POLYCAP AS囊式濾器的詳細介紹
WHATMAN POLYCAP AS囊式濾器6705-3602 6705-3604 6705-3610 6708-3602 6708-3604 6709-3602
Polycap™ AS (Aqueous Solution) is a unique product recommended for filtering aqueous solutions. It combines a glass microfiber (GMF) prefilter and a nylon membrane, prolonging the life of the filter and allowing larger volumes and difficult samples to be filtered easily.
Features and benefits
- First layer (GMF) acts as a prefilter to ensure longer membrane (0.2, 0.45 and 1.0 µm) life and higher filtration efficiency
- Nylon membrane layer is inherently hydrophilic, has low extractables, is biosafe and has excellent flow rates
- Ultra-clean containing no surfactant or mold release agents
- Housing thermally fused (no glues, adhesives or extraneous materials)
- Integrity-testable by bubble point, pressure decay or forward flow methods
- Provides highly effective filtration area in a small size
- Autoclavable; some presterilized with gamma irradiation
- Manufactured in clean room facilities under ISO Quality Systems
Applications
- Admixtures
- Biologicals
- Buffers
- Cleaning/rinsing solutions
- Enzymes
- Extemporaneous solutions
- Immunologicals
- Irrigation solutions
- Nutrients
- Ophthalmic solutions
- Pharmaceutical solutions
- Reagent preparation
- Salt solutions
- Therapy solutions
- Tissue culture media
- Viral suspensions
| Technical Properties - Polycap AS |
| Housing |
Polypropylene |
| Vent |
On inlet |
| Prefilter |
Glass microfiber double laminated with polyolefin monofilament non-woven |
| Membrane |
Nylon |
| Support system |
Polypropylene |
| Sealing |
Heat-fused |
| Maximum pressure |
4.1 bar (60 psi) |
| Endotoxin level |
L LAL tested, ≤ 0.5 EU/ml |
| Biosafety |
Materials pass USP Class VI |
| Sterilization |
Certain filter devices have been sterilized.
* Capsules may be autoclaved at 121°C for 20 minutes (maximum 132°C). However, an integrity test should be performed after autoclaving. Filling bell is not autoaclavable but is detachable (*sterile and nonsterile options offered) |
| Filtration area |
36 mm capsule: 400 cm2 (62 in2)
75 mm capsule: 820 cm2 (127 in2)
150 mm capsule: 1650 cm2 (256 in2) |
| IPA bubble point |
0.2 µm membrane: > 1.1 bar (16 psi)
0.45 µm membrane: > 0.69 bar (10 psi)
1.0 µm membrane: > 0.14 bar (3 psi) |
SSB - Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
1/2 SB - Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing
MNPT - Male national pipe thread
FNPT - Female national pipe thread
HB - Hose barb |
| Ordering Information - Polycap AS |
| Catalog Number |
Description |
| 6708-3602 |
Polycap AS 36, sterile, 0.2 µm, with 1/2 SB inlet and outlet, 1/pk |
| 6705-3602 |
Polycap AS 36, sterile, 0.2 µm, with SB inlet and outlet, 1/pk |
| 6709-3602 |
Polycap AS 36, sterile, 0.2 µm, with MNPT inlet and SB outlet, 1/pk |
| 2606T |
Polycap AS 36, 0.2 µm, FNPT inlet and outlet, 5/pk |
| 2606NS |
Polycap AS 36, 0.2 µm, with SB inlet and outlet, 5/pk |
| 6708-3604 |
Polycap AS 36, sterile, 0.45 µm, with 1/2 SB inlet and outlet, 1/pk |
| 6705-3604 |
Polycap AS 36, sterile, 0.45 µm, with SB inlet and outlet, 1/pk |
| 2607NS |
Polycap AS 36, 0.45 µm, with SB inlet and outlet, 5/pk |
| 6705-3610 |
Polycap AS 36, sterile, 1.0 µm, with SB inlet and outlet, 1/pk |
| 2608NS |
Polycap AS 36, 1.0 µm, with SB inlet and outlet, 5/pk |
| 6706-3602 |
Polycap AS 36, sterile, 0.2 µm, with SB inlet and outlet plus filling bell, 1/pk |
| 6709-7502 |
Polycap AS 75, sterile, 0.2 µm with MNPT inlet and SB outlet, 1/pk |
| 6708-7502 |
Polycap AS 75, sterile, 0.2 µm with 1/2 SB inlet and outlet, 1/pk |
| 6705-7502 |
Polycap AS 75, sterile, 0.2 µm, with SB inlet and outlet, 1/pk |
| 2706T |
Polycap AS 75, 0.2 µm, with FNPT inlet and outlet, 5/pk |
| 6705-7504 |
Polycap AS 75, sterile, 0.45 µm, with SB inlet and outlet, 1/pk |
| 6708-7504 |
Polycap AS 75, sterile, 0.45 µm, with 1/2 SB inlet and outlet, 1/pk |
| 6709-7504 |
Polycap AS 75, sterile, 0.2 µm, with MNPT inlet and SB outlet, 1/pk |
| 2707NS |
Polycap AS 75, 0.45 µm, with SB inlet and outlet, 5/pk |
| 6705-7510 |
Polycap AS 75, sterile, 1.0 µm, with 1/2 SB inlet and outlet, 1/pk |
| 6706-7502 |
Polycap AS 75, sterile, 0.2 µm, with SB inlet and outlet plus filling bell, 1/pk |
| 2806T |
Polycap AS 150, 0.2 µm, with FNPT inlet and outlet 5/pk |
| 2806 |
Polycap AS 150, sterile, 0.2 µm, with 1/2 HB inlet and outlet, 5/pk |
| 2805 |
Polycap AS 150, sterile, 0.2 µm, with 1 11/2 sanitary inlet and outlet, 5/pk |
| 2807 |
Polycap AS 150, sterile, 0.45 µm, with 1/2 SB inlet and 1/2 HB outlet, 5/pk |
