如果您對該產品感興趣的話,可以
產品名稱:
Microsart ? e.jet Electric Vacuum Pumps真空泵
產品型號:
Microsart ? e.jet Electric Vacuum Pumps真空泵
產品展商:
其它品牌
簡單介紹
The Microsart ? e.jet is a new vacuum laboratory pump able to create sufficient vacuum for vacuum filtration and simultaneous transfer of the filtered liquid to waste. The Microsart ? e.jet is ideal f
Microsart ? e.jet Electric Vacuum Pumps真空泵的詳細介紹
The Microsart ? e.jet is a
new vacuum laboratory pump able to create sufficient vacuum for
vacuum filtration and simultaneous transfer of the filtered
liquid to waste. The Microsart ? e.jet is ideal for sample
preparation in Microbiology achieving a trans membrane pressure
of 800 mbar and a flow rate of 3.5 l/ min. Constant flow rates
and a defined maximum vacuum guarantee smooth and reliable
filtration.
Until now vacuum equipment for the Membrane
Filtration Method consists of numerous parts including connectors,
tubes, vacuum containers, protection filter, Woulff’s bottle and a
vacuum pump. After several samples the vacuum must be broken to
empty the filtrate collection container. The complete traditional
equipment requires far more laboratory space and is time consuming
to operate and maintain.
The new Microsart ? e.jet greatly reduces operating complexity.
The Microsart? e.jet pump is an ideal accessory
for 3-branch and 1-branch manifolds. Compared to traditional
equipment Microsart? e. jet and stainless steel manifold require
only 30% of the average space meaning in particular less congestion
working in Laminar Flow Cabinets.
Traditional vacuum pumps often loose their
efficiency and capability to generate sufficient vacuum, when
liquid is drawn into the pump head. The Microsart? e.jet is
designed to pump both gas and liquids, meaning no loss of
efficiency or malfunctions from water drawn into the pump head.
Specifications
|
Flow rate
|
> 3.5 l/min
|
|
Max. Vacuum
|
0.2 bar
|
|
Max. Pressure
|
1.0 bar
|
|
Weight
|
1,000 g
|
|
Dimensions (W/L/H)
|
120x170x190 mm
|
|
Max. ambient Temp.
|
+ 5...+ 40 °C
|
|
Max. Temp of liquid
|
+ 5...+ 80 °C
|
|
Max. viscosity
|
< 150 cSt
|
|
Protection type
|
IP 65
|
|
Protection class
|
III |
Order Information
|
Description
|
Order No.
|
|
Microsart? e.jet Fluid Pump, 3.5 l/ min
|
166MP-3
|
|
Replacement Parts
|
Order No.
|
|
Pump head complete for 166MP-3
|
1EP---0001
|
|
Power supply complete for 166MP-3
|
1EE---0007
|
|
Threaded Fitting for 166MP-3
|
1EAF--0020 |
